Tires/Tubes

The Corsa Pro tire is the choice of the pro peloton, now even faster and with increased wet weather grip and puncture resistance. - Graphene + Silica compound ensures speed and confidence through a range of surface conditions, for the ultimate control - Proven cotton casing material, wrapped in a revolutionary new construction process provides the foundation for the new standard in race-day performance road tires - High-density layer below tread surface for improved puncture resistance - Zylon bead for easy fitting and air retention - Bead Shield reinforcing guard for extra bead protection - Tubeless Ready Construction

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Thin, low viscosity liquid with improved sealing capabilities over the standard NoTubes sealant. - Twice the sealing crystals compared to standard NoTubes sealant - XL crystals and standard crystals combine to seal larger punctures - Stable down to -30 degrees Fahrenheit - Not compatible with injectors or through valve cores

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

Silca Ultimate Tubeless Sealant uses FiberFoam® technology to harness the power of carbon fiber to seal up to 7mm punctures without losing pressure. - Effective down to 10F/ -12C - Seals 7.5mm holes for up to 6mo - Must be poured into tire during install - Not injector compatible (It seals holes bigger than your valve) - Use Replenisher every 90-120 days for best performance - 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals - Made in the USA

Use Ultimate Tubeless Sealant Replenisher to inject into your tires and keep your Ultimate Tubeless Sealant w/FiberFoam going for 12-18 months! - Effective down to 0F/ -18C - Compatible with sealant injectors - Comes with rubber hose for easy injection - When used every 90-120 days, can extend Ultimate Tubeless Sealant w/FIBERFOAM life to a year - Use Replenisher every 90-120 days for best performance - Made in the USA

- High-quality, ultra-low weight tube that retains air just as well as conventional butyl tubes - Possesses the same resistance to punctures - 40mm valve length

- Tubeless-Easy with MicroSkin fabric for Gravel - OneStar compound helps to achieve an extremely low rolling resistance - The perfect tire for the latest gravel bike trend

The G-One RS is a high-performance gravel tire tailored for racing and fast-paced rides on mixed terrain. It features a refined tread pattern designed to optimize speed and control, with tightly spaced central knobs for low rolling resistance on hard surfaces. The G-One RS features the lowest rolling resistance in the G-One range. - Maximum efficiency on light terrain, hard surfaces, and asphalt - Braking and traction edges for front wheel and rear wheel thanks to scale-like tread pattern - Souplesse construction for smooth ride + high puncture protection under tough racing conditions

The pioneer in puncture protection, mileage, and environmental friendliness - Very good puncture protection thanks to GreenGuard - Most environmentally friendly bicycle tire: - Produced entirely from Fair Rubber - Consists of 70% recycled or renewable materials: - Among other things, the first and only tire with carbon black from recycled bicycle tires (rCB) - 98% pollution-free - Revised tread pattern optimizes rolling performance - Recommended for bikes and e-bikes

THE ORIGINAL: The archetypal high quality touring tire. The highly elastic GreenGuard layer is 3mm thick. One third of the GreenGuard is made up of recycled latex products. The "Anti-Aging" sidewall can withstand the typical cracking that results from overloading due to insufficient inflation pressure for much longer. E-BIKE READY. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50). - Very good puncture protection thanks to GreenGuard - Especially suitable for asphalt - Available in many sizes - Performance line - E-rating: E-25 - 800g

Classics. Tires in traditional sizes and classic tread designs. Active Line quality. K-Guard puncture protection. Wired tires.

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes, the Magic Marry offers perfect all-around characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels. - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip, even in extremely muddy terrain. - Equipped with V-Grooves specially developed for Magic Mary, every stud can bite into the ground for even more grip. - Angled studs in the middle of the tread optimize the rolling characteristics.

The Flat-less tire with distinctive trekking profile. Asphalt or off-road? Everyday use or bicycle expeditions? This versatile tire always does the job. Its robust construction handles almost any mistreatment. Protected by SmartGuard, the most effective puncture protection belt available for bicycle tires. - Maximum puncture protection - Robust construction and modern tread design - Versatile - suitable for asphalt, dirt roads and light terrain - In classic sizes with proven construction of the Marathon Plus - Performance line - E-rating: E-54

- Built to cover a wide range of conditions. It aims to be the perfect travel buddy for your bikepacking adventures. - Featuring a reinforced and sturdy tubeless-ready 60tpi carcass plus a bead-to-bead protection layer. - Designed to resist lateral cuts on different grounds. - Lighter on the central part and more aggressive on the shoulder, the knobs are off-road oriented to promote rider support from light gravel to extensive trips. - ProCompound Gravel developed for extended mileage. - The combination of tread design together with the compound prioritizes traction and grip on different surfaces, designed to allow the rider to go everywhere.

- Medium profile and tread spacing for riding quickly and confidently over a mixed variety of terrains, from hard to soft, whether for dry or wet - SpeedGRIP Compound formulation for on and off-road rolling efficiency coupled with high tear resistance and high wet grip - High-strength woven Nylon fabric from bead to bead for added cut and puncture protection - Multi-ply 127tpi Nylon casing construction - Tubeless-ready aramid folding bead optimized for wide rims and lower pressure riding

- Medium profile and tread spacing for riding quickly and confidently over a mixed variety of terrains, from hard to soft, whether for dry or wet - SpeedGRIP Compound formulation for on and off-road rolling efficiency coupled with high tear resistance and high wet grip - High-strength woven Nylon fabric from bead to bead for added cut and puncture protection - Multi-ply 127tpi Nylon casing construction - Tubeless-ready aramid folding bead optimized for wide rims and lower pressure riding

- Gravel-racing specific tire, derived from our experience in the biggest competitions around the world and feedback from Pro athletes. - Tread design inspired by the Scorpion XC RC. - Key features: Higher average speed on straight and fast lines, improved lateral grip when off-road cornering.

- The Cinturato Velo is designed around reliability in bad road conditions and heavy usage as priority and it still keeps Pirelli DNA thanks to its SmartNET Silica compound and confidence-inspiring handling. - Its patent pending Armour Tech construction combines a bead-to-bead high density layer to an aramid breaker and aramid fibers dispersed into the tread. - The SmartNET Silica compound coupled with Pirelli long experience in tread design, adds the safety and handling in any condition, whether it is wet or dry, Pirelli is already famous for.

The P Zero Race TLR is the most performing tire in Pirelli’s portfolio, as well as being the first tire with a tubeless technology entirely made in Italy. The design features SpeedCore technology in a 120tpi casing, utilizing a layer of compound mixed with aramid that covers the inner layer of the tire, improving the smoothness and the resistance of the rubber. The result is a less stiff, but faster tire. The compound on the other hand, maintains the same advanced SmartEVO technology, commonly found in other high-performance tires throughout the P Zero range. - SpeedCore is an innovative tubeless-ready construction that consists of a thin air-tight layer of rubber compound infused of aramid particles. This layer covers the internal part of the tire and thanks to the presence of the aramid into the rubber blend, it allows for better mechanical resistance, improved air retention and overall greater flexibility - SmartEVO compound uses a blend of polymers to provide maximum grip with a low rolling resistance, allowing for maximum speed and control - 700 x 28 and larger sizes are compatible with hookless rims, 700 x 26 size tires are not hookless compatible - Hookless rims subject to ETRTO 5bar/73psi max pressure limitation

- Removable valve core - 0.9mm wall thickness

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

GravelKing SK Plus has a semi-knobby tread pattern with a super-tough puncture belt for aggressive gravel roads. GravelKing SK Plus has side reinforcement with Protite and a bead-to-bead nylon puncture belt, resulting in a 4-ply, super-tough casing.