Parts & Accessories

Freshen up your iXS Xact helmet with this replacement liner.

Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Solstice helmets including Youth models - Original equipment replacement visor

The Aeroshell is a plastic cover designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the rider's head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine—the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - Fits Lazer's Genesis and Grace helmets only

Replacement chinbar for the Super Air R helmet.

Bandito/Diablo Winter Liner

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for Bontrager Dipper MIPS helmets - Not compatible with non-MIPS Bontrager Dipper helmets - Helmet fit pads should be replaced once per year to maintain fit and hygiene

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

- Fits both GameChanger and Airbreaker helmets - Easy to install

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

New pads help dial in the perfect fit to keep you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for Bontrager Starvos WaveCel helmets - Helmet fit pads should be replaced once a year to maintain fit and hygiene

- Replacement padding for Lumos Matrix and Street helmets

The Sport Recreational Helmet Vent Light is one of the easiest and most powerful ways to increase visibility and safety on the road.

The replacement lens for your Aerohead helmet featuring premium ZEISS Optics and a choice of either grey (for sunny/mixed conditions) or clear (for low light racing and training). The magnetically fastened ZEISS optical shield provides wraparound eye protection with exceptional optical clarity, and it's easy to flip up or remove with one hand when appropriate.

New pads help dial in the perfect fit to keep you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Rally WaveCel helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets. - Works with all Bontrager Ion and Flare lights

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Lithos or Rally helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

New pads can help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. New pads help your helmet fit best and smell fresh Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Circuit MIPS helmet - Also compatible with non-MIPS Bontrager Circuit helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Dipper helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Ballista MIPS helmet - Also compatible with non-MIPS Bontrager Ballista helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation

Upgrade any summer Bern helmet with added warmth and comfort for cold weather riding. Water and wind resistant. Stretch Lycra custom fit. Breathable top beanie material.

Keep safe and look great with genuine replacement parts for your Bontrager helmet. - Original replacement BOA® Fit System for your Bontrager Velocis Mips helmet - Only compatible with Bontrager Velocis Mips with the BOA® Fit System - Full-length fit system designed for use with medium and large sized helmets - Short length fit system designed to optimize the fit of small sized helmets

Keep safe and look great with genuine replacement parts for your Bontrager helmet. - Keep your helmet secure - Fits all sizes

New pads help dial in the perfect fit to keep you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for Bontrager helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Spare visor and bolts for Trigger FF helmet

Spare cheek pads set for Xult DH helmet

- Women's Premium EPS Winter Liner w/ Boa Adjuster - For Lenox, Brighton

Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.

Quin Sensor for AirDrop/Moventor 2.0 MIPS/MoDrop/MoDrop MIPS