Lighting

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

Topeak WhiteLite Aero USB 1W and RedLite Aero USB 1W rear safety lights. WhiteLite Aero USB 1W Light up your ride like a thunder bolt! Brand new optimized optical lightning design by COB LED provides ultimate brightness output to 110 Lumens. The slim, aerodynamic shape fits aero or fork blades perfectly. Rubber strap allows tool-free mounting and removal. - Lamp: White COB LED - Battery: 3.7 V 640 mAh Lithium Ion (integrated) - Charge: Micro-USB - Charge Time: 2 hr - Control/Burn Time (approx): 4 modes -- 2 hr High Beam -- 4 hr Low Beam -- 15 hr Blinking -- 50 hr Pulse - Reserve time: 0.5 hr - Luminous intensity: 110 Lumens (1200 CD) - Lamp Housing: Injection molded plastic - Mount: Aero / Round fork blades - Added Features: Blinking mode, Low battery indicator - Size: 7.6 x 3.4 x 3.1 cm / 3” x 1.3” x 1.2” (Light) - Weight: 42 g / 1.48 oz (Light) Redlite Aero USB 1W Be the spotlight in the dark! Super bright, slim, aerodynamic tail light fits aero / round seatposts, seatstays or Topeak bags perfectly. Rubber strap allows tool-free mounting / removal and multi mounting positions. - Lamp: Red COB LED - Battery: 3.7 V 640 mAh Lithium Ion (integrated) - Charge: Micro-USB - Charge Time: 2 hr - Control / Burn Time (approx): 4 modes -- 2 hr High Beam -- 4 hr Low Beam -- 15 hr Blinking -- 50 hr Pulse - Reserve Time: 0.5 hr - Luminous intensity: 55 Lumens (600 CD) - Lamp Housing: Injection molded plastic - Mount: Seatpost / Seatstay / Topeak bags - Added Features: Blinking mode, Low battery indicator - Size: 7.6 x 3.4 x 3.1 cm / 3” x 1.3” x 1.2” ((Light)) - Weight: 42 g / 1.48 oz (Light)

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

Tool-Free design fits 22-34mm handlebars - 2 x 10,000 MCD White LEDs - Constant (30 hrs), Chasing mode (55 hrs), Flashing mode (80 hrs) - Water resistant - CR2032 3V batteries (x2) included

Compact, aero-post compatible safety light with Smart Connect compatibility. Smart Connect allows for customization and/or control of the output modes through the Lezyne LED Ally phone app, and it can link with compatible Lezyne LED front lights. Its co-molded construction is super-light, yet durable and has an IPX7 waterproof rating. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive Pro Rear provides up to 75 lumens (Daytime Flash) and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging for up to 19.5 hours of runtime. Specs - Max Lumens: 75 - Weight: 45g - Max Runtime: 19:30 hours - Recharge Time: 2:15 hours

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear

A CatEyeSYNC-enabled light that increases your visibility as you slow. - CatEyeSYNC features one-touch control. Turn one light on, and all your CatEyeSYNC lights come on. - Using wireless technology, CatEyeSYNC lights provide the ease of synchronizing all lights to operate as one. - Check battery levels, customize modes, set brake mode, and synchronize flash pattern preferences using your Smartphone. - Simple and superior 360-degree visibility is one touch away with up to 7 lights synced to operate as one. (The other CatEyeSYNC light options that can be added to your SYNC Core system are SYNC Wearable and SYNC Core.) With a built-in accelerometer that switches to burst mode as you decelerate, SYNC Kinetic gives you an extra level of defense. Use alone or in combination with other models in the CatEyeSYNC family for unparalleled levels of 360-degree visibility, day or night. - Built-in acceleration sensor for Kinetic mode automatically turns on with 50 lumen brightness when bike deceleration is detected) - Excellent daytime visibility in Daytime HyperFlash mode - Group Ride mode is eye-friendly to team riders behind - Superior side visibility - OptiCube lens technology - Lithium-ion polymer rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 6 modes - Charging time: 2.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - The CatEyeSYNC smartphone app is required to pair the lights. Before you purchase, be sure your smartphone model is compatible. - Dimensions: 74.5 x 26 x 28mm - Weight: 43g (with battery) - Light source: Red LED X 5 - Battery: Lithium Polymer rechargeable battery Runtime: - High (40 lumens): 1.5 hrs - Low (5 lumens): 15 hrs - Flashing (30 lumens): 50 hrs - Rapid (50 lumens): 20 hrs - Group Ride (40 lumens): 15 hrs - Daytime HyperFlash (50 lumens): 30 hrs Runtime when Kinetic mode is enabled 60 times per hour - High (40 lumens): 1.4 hrs - Low (5 lumens): 6 hrs - Flashing (30 lumens): 7 hrs - Rapid (50 lumens): 6 hrs - Group Ride (40 lumens): 6 hrs - Daytime HyperFlash (50 lumens): 7 hrs - Recharge time: 2.5 hrs (USB recharge) - Mount size: Rubber band mount (fits 26.0-32.0mm seatpost) - Note: Activation of the Kinetic mode depends on the degree of deceleration, the light may not react or the reaction may be delayed.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

- Head and Tail Light features: - off-constant-flash-chasing - 2 x AAA (1.5V – LR3) - batteries included - 35/70 hours of burn - time (constant|flash) - 600m visibility

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

Head and Tail Light features: - off-constant-flash-chasing - 2 x AAA (1.5V – LR3) batteries included - 35/70 hours of burn time (constant/ flash) - 600m visibility

BREAKING THROUGH DESIGN CONCEPTION, BRINGS YOU REAL 360° VISIBILITY. POWERFUL LIGHT OUTPUT, LET YOU BE SEEN DAY AND NIGHT. SMART MODES SETTINGS, MAKE IT ALL HANDS FREE. - 360° Tracing light design - Smart motion sensor - Sensitive ambient light sensor - Low power mode - Smart battery indicator - IPX6 waterproof rate

Magicshine tool-free helmet mount MJ-6058, compatible with most bike lights with the o-ring type mount. Attach your Magicshine Bike Light to your helmet. Adding a helmet mounted light to your existing bar mounted bike lights gives an enhanced night time riding experience. By positioning an extra light higher up you get added perspective, enabling faster and more technical riding on the mountain trails. The slightly larger attachment gives you some discretion over the angle of beam from your light head, meaning you can use the light for many other activities not just night riding. A Velcro strap allows the helmet mount to be fitted and removed from your vented helmet within seconds.

The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL - 1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Topeak's WhiteLite Aura's super-bright 0.2W LED is just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 120 hours of use!

Topeak's RedLite Aero is sleek and fits most seatposts or seatstays with near-perfect aerodynamic precision. This ultra-bright light uses 3 super-bright red LEDs that get you noticed. The AAA battery (included) offers up to 80 hours of run time with constant and blinking modes.

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

Topeak's WhiteLite Aura & RedLite Aura Combo light set provides ample light to get home safely after the sun goes down, thanks to the super-bright 0.2W LED in front and high-flux piranha LED and 2 super-bright red LEDs in the rear. They mount quickly and easily and the included coin batteries are good for up to 120 hours of use!

The Serfas Apollo is a super compact LED light which packs a bright punch in a tiny waterproof metal housing. Mounts in seconds using the attached mini molded rubber ladder strap and hook system. Powered by (2) replaceable CR2032 batteries. Features - Strap Fits Bars 20 – 40mm - Waterproof - 240° Visibility - Perfect For Stores Without Counter Space Specs: - Modes: Solid 50 hrs, Flash 150 hrs - Weight: 29 Grams With Bracket - Runtime: Up To 50 hrs On Flash - Battery: (2) CR2032

Topeak's WhiteLite HP Beamer's three super bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included AA batteries are good for up to 30 hours of use (in blinking mode)! Plus, the WhiteLite can be removed from the mount and used as a flashlight!

SEEMEE 60 is a bike taillight with high powered COB red LED light source, the max output is 60 lumens, and is capable of 180 degrees of visibility   - SMART BRAKE SENSOR LED BIKE REAR LIGHT--Built in sensor will activate the brake light feature when it detects a sudden change in motion pattern, and blinks in a series of super fast flashes at 60 lumens. If no vibration is detected in 60 seconds, SEEMEE60 enters into a dormant mode to save energy and is re-activated upon any movements. - USB RECHARGEABLE BIKE BRAKE LIGHT-- It is rechargeable via Micro USB. A full charge will take 1.5 to 2 hours under 5V/500mA, Charging light will turn from red to green indicating its built in Lithium battery has been fully recharged. - QUICK INSTAILL--Installation and removal of the taillight is super quick and easy, rotate 90 degrees to install and rotate 90 degrees back to remove. - WATERPROOF OF IPX6--Anodized aluminum surface crafted seamlessly around the red led surface allows the SEEMEE60 to be completely waterproof with an IPX6 rating. - MULTIPLE MODES--3 brightness levels, a constant mode and 2 flash modes can be used in any combo. - Size: 41x33x23mm. - Weight: 34g.

Grid Front and Rear Lights have four mode options, you can choose if you need high lumen power or extended run time. A complete set ready for those commuting in the city, riding the open roads, or heading to their local trail. The Grid Light Set offers plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The WhiteLite's 3 powerful LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included mini batteries are good for up to 100 hours of use! Plus, the WhiteLite II features a super-simple no-tools handlebar mount that works on any bike!

Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!